Loading...
Serving New Braunfels, TX and surrounding areas. (830) 402-1940
If standard epoxy coatings keep failing in the Texas heat, urethane cement is the upgrade. It handles temperature swings, moisture, and heavy use - without peeling, bubbling, or yellowing after a few summers.
Urethane cement flooring in New Braunfels is a thick, seamless coating poured directly over your concrete slab - it bonds tightly to the concrete and cures into a surface that handles extreme heat, moisture, and heavy traffic, and most standard garages are completed in one to two days. It looks smooth and polished but is far tougher than standard epoxy under real Texas conditions.
The reason homeowners in New Braunfels increasingly choose urethane cement over standard epoxy is simple: the climate here is hard on coatings. Summer garage temperatures can climb well above 100 degrees, and moisture from the clay-heavy soil and the seasonal rains along the Guadalupe River corridor puts additional stress on bonded surfaces. Urethane cement was designed for exactly these conditions. If you are undecided between urethane cement and a decorative option like commercial and industrial epoxy floor coatings, we can help you weigh the tradeoffs based on your specific space and use case.
Surface preparation is the foundation of a floor that actually lasts. We grind or blast the existing concrete, repair cracks, and test for moisture before any material goes down. The American Concrete Institute identifies surface preparation as the primary factor in coating adhesion and longevity - a fact backed up by every failed floor we have ever been called to replace.
If you already have an epoxy or painted floor and it is starting to lift, bubble, or peel in patches, the original coating could not handle the heat and moisture in your garage. In New Braunfels, this happens faster than most homeowners expect - sometimes within two or three years. Urethane cement is a more durable replacement that is built for the conditions that caused the previous coating to fail.
A chalky white residue on your concrete floor - especially after rain - is a sign that moisture is moving up through the slab from the ground below. This is common in New Braunfels neighborhoods near the Guadalupe River corridor and in lower-elevation areas with clay-heavy soil. Left unaddressed, that moisture destroys most floor coatings. Urethane cement tolerates it better than most alternatives when installed correctly.
Bare concrete is porous, and once oil, grease, or chemical stains soak in, they are nearly impossible to remove. If your garage floor looks permanently dirty or the surface has started to pit and flake, a urethane cement coating seals it and gives you a floor that can actually be kept clean with basic mopping.
Small hairline cracks in a concrete slab are common in Comal County's shifting clay soils. If you have noticed cracks widening or new ones appearing after a dry summer or a wet spring, it is worth having a contractor assess the slab. A urethane cement coating can bridge minor cracks and protect the surface from further deterioration, buying time and preventing water intrusion.
Urethane cement is available in a range of finish options - smooth for a clean, industrial look, or lightly textured to add slip resistance in wet environments. The coating goes down in layers totaling roughly a quarter inch, which is enough to hide minor surface imperfections while leaving enough clearance for doors and transitions to adjacent flooring. For homeowners or business owners who want maximum chemical resistance or are dealing with floor drains, floor slopes, or heavy equipment, urethane cement is typically the right call over standard polished concrete flooring alternatives.
Beyond the coating itself, our process includes a full slab assessment, moisture testing, crack repair, and surface grinding before anything is poured. If your slab has a previous coating that needs to come off first, we handle that too - stripping and grinding are part of the prep, not surprise add-ons. The finished floor gets a topcoat sealer that adds hardness and makes the surface easier to maintain. We walk you through finish and color options before the job starts so the result matches what you had in mind.
Best for homeowners who want a long-lasting, easy-to-clean floor that handles Texas heat and the daily wear of a working garage or hobby space.
Best for businesses that need a seamless, chemical-resistant floor that can be cleaned to health code standards and holds up under constant foot traffic and spills.
Best for spaces where moisture coming up through the slab is an ongoing issue - urethane cement tolerates this better than most coatings when paired with a moisture-mitigation layer.
Best for facilities that need a floor rated for forklift traffic, chemical spills, and the kind of abuse that would destroy a standard epoxy system within a year or two.
New Braunfels sits in the Texas Hill Country where summer temperatures regularly exceed 100 degrees and garage slabs can hit 130 degrees or more in direct sun. Standard epoxy coatings are not built for that. They soften, bubble, and lose their bond under sustained heat - which is why so many homeowners in this area end up calling a contractor two or three years after their epoxy was installed because it is already peeling. Urethane cement handles those temperature extremes without breaking down, making the higher upfront cost the more practical investment over time. This is especially true in the newer subdivisions like Vintage Oaks and Veramendi, where large garages are standard and homeowners expect their spaces to hold up.
Moisture is the other factor that sets this area apart. New Braunfels straddles the Guadalupe and Comal rivers, and homes in lower-elevation neighborhoods or near the river corridors can experience elevated ground moisture pushing up through slabs - particularly after the heavy spring rains that hit the region each year. Urethane cement is formulated to tolerate this moisture in a way that standard epoxy cannot. We test every slab before we start, and if moisture levels are elevated, we recommend a mitigation layer before the coating goes down. We serve homeowners across the broader region, including Schertz and Cibolo, where similar soil and climate conditions create the same demand for durable, moisture-tolerant floor systems.
Describe the space and what you are trying to solve. We respond within one business day and schedule a free on-site visit - we need to see the concrete in person to give you an accurate number. Be cautious of any contractor who quotes firm pricing over the phone without a site visit.
We look at the slab closely - checking for cracks, moisture, old coatings, and surface condition. We may tape a plastic sheet to the floor overnight to check for moisture. You get a written estimate that breaks down what prep is needed and what the finished floor will look like before any work begins.
We grind or blast the concrete to remove any old coating, open the surface pores, and give the material something to bond to. Cracks and damaged areas are repaired. Expect noise and some dust - we use dust-collection equipment, but it is still a good idea to cover anything nearby that you want to protect.
We mix and pour the urethane cement, spread it evenly, and apply the finish coat. Before we leave, we walk the floor with you - if anything does not look right, we address it on the spot. Light foot traffic within 24 hours. Vehicles after 48 to 72 hours, depending on conditions.
Free on-site visit. No obligation. We respond within one business day.
(830) 402-1940We test every slab for moisture before we start, which is not standard practice across all contractors in this area. In New Braunfels - especially near the river corridors - skipping this step is how coatings fail within months. If we find elevated moisture, we tell you and recommend the right mitigation path before a dollar of coating material goes down. No surprises later.
We select products based on the specific heat and moisture conditions in Central Texas, not whatever happens to be in the van. A system that performs well in a climate-controlled showroom can still fail in a New Braunfels garage that hits 130 degrees in July. We use materials rated for those conditions, because we have seen what happens when the wrong product is used here.
Our written estimate spells out prep, materials, finish coat, and cleanup. What you see in the estimate is what you pay at the end. The Portland Cement Association sets clear guidance on installation standards - we follow those and document the process so there is no question about what was done and why.
We walk every finished floor with the customer before we pack up. If there is a thin spot, an edge that needs touching up, or anything that does not match the estimate, we address it that day - not after you have already signed off and paid. This is how we prevent callbacks and the kind of contractor-customer friction that leaves everyone frustrated.
Our approach - moisture testing, climate-appropriate products, transparent estimates, and a same-day walkthrough - is what separates a floor that holds up through New Braunfels summers from one that starts failing before the year is out. We do the job right once, so you do not have to pay for it twice.
A grinding and sealing process that brings out the natural look of your concrete - lower profile than a poured coating, with a refined, matte-to-gloss finish.
Learn MoreHeavy-duty epoxy systems for warehouses, shops, and commercial spaces that need chemical resistance and easy maintenance without the cost of urethane cement.
Learn MoreSpring and fall are the best installation windows in Central Texas. Schedule your free estimate now before the next booking window fills up.