Loading...
Serving New Braunfels, TX and surrounding areas. (830) 402-1940
When a concrete slab has moved, cracked, or failed beyond what repair can fix, the right call is a clean removal. We strip and haul concrete floors in New Braunfels - permits handled, debris gone, subgrade left ready for whatever comes next.
Concrete floor stripping in New Braunfels means removing an existing slab or surface layer entirely - the old material comes out, leaving a clean base for whatever comes next. It is not patching or resurfacing. Most residential jobs - a single-room floor or garage slab - take a crew of two or three people one to two days to complete, including debris haul-off.
The honest answer on whether removal is the right call depends on what is actually wrong with the floor. Cracks that keep coming back, a slab that sounds hollow underfoot, or moisture staining that suggests the soil below is wet - these are signs the slab is no longer doing its job, and patching the surface will not fix the underlying problem. In New Braunfels, the clay-heavy soils that cause slabs to shift and crack in the first place are also what the next contractor needs to evaluate before a new pour goes in. Removal gives everyone a clean look at the subgrade. When removal is not actually necessary, we will tell you - and point you toward concrete grinding and surface preparation or another repair path that costs less and accomplishes the same goal.
The U.S. Environmental Protection Agency notes that concrete is one of the most recycled construction materials in the country - broken pieces from removal jobs are typically hauled to a recycling facility rather than a landfill, which is how we handle debris on every job.
If you have had cracks patched before and they reappear within a season or two, the slab itself is moving - not just settling. In New Braunfels, the clay-heavy soil underneath many homes expands and contracts with the rain-and-drought cycles common to the Texas Hill Country, and no surface patch will fix a slab that is being pushed around from below.
If certain spots feel springy, sound hollow when you tap them, or have a noticeable dip or rise, the slab has likely separated from the soil beneath it. This is a common sign in New Braunfels homes built on expansive soils, and it means the slab is no longer doing its job - patching the surface will not solve the underlying problem.
If you are turning a garage into living space, finishing a basement, or installing new flooring that requires a perfectly level surface, the existing slab may be too damaged, too thin, or too uneven to work with. Stripping it out and starting fresh is often the most cost-effective path when the alternative is layering new material over a compromised base.
White chalky deposits - called efflorescence - or dark moisture stains are signs that water is moving up through the concrete from the soil below. In lower-lying parts of New Braunfels near the Guadalupe or Comal rivers, this is a real concern. If the moisture source is significant, removal and replacement with a proper moisture barrier underneath is the most durable long-term solution.
We handle full slab removal for residential and light commercial spaces across New Braunfels - garages, utility rooms, covered patios, basements, and single-room interior floors. Every job starts with an on-site assessment where we check the slab condition, look for signs of steel reinforcement or post-tension cables, and evaluate how equipment will access the space. That assessment drives the quote - no two slabs are identical, and the price difference between a standard unreinforced garage slab and a post-tension slab with difficult access can be significant. We use wet-cutting methods and industrial vacuum systems throughout the work to keep dust under control, as required under OSHA silica standards for concrete demolition work.
For jobs requiring a permit - which is most structural slab removals in New Braunfels - we handle the paperwork with the city before any work begins. When the concrete is out, we leave the subgrade level, clean, and free of buried debris so the contractor coming in after us can start without correcting our work first. We also coordinate directly with epoxy floor coating and concrete grinding and surface preparation work for homeowners who want removal and a finished floor surface handled by one crew with one project timeline.
Best for homeowners replacing a failed or severely damaged slab. We break, remove, and haul all concrete debris - leaving the subgrade ready for a new pour.
Best for jobs where only one section of the slab has failed. We remove the damaged area cleanly without disturbing the surrounding concrete.
Best for newer New Braunfels homes built with post-tension slabs. Requires specialized cutting equipment and experience - we assess the cable layout before cutting begins.
Best for homes where soil movement or moisture issues have been a problem. After removal, we evaluate what is underneath and advise on stabilization or moisture barrier work before the new slab goes in.
Much of New Braunfels sits on clay-heavy soil that swells when it rains and shrinks when it dries out. That movement is the primary reason slabs crack, shift, and ultimately fail here - and it also means the soil exposed after removal needs to be evaluated carefully before a new slab goes in. Pour a new slab over the same unstable base without addressing the soil conditions, and you are setting up the same problem to repeat in a few years. We flag this every time we assess a removal job in New Braunfels so the homeowner knows what to budget for. New Braunfels has also been one of the fastest-growing cities in the country for several years running, which means a large share of homes in neighborhoods close to Seguin and across Comal County were built in the last decade with post-tension slabs - a slab type that requires specialized equipment and knowledge to remove safely.
The City of New Braunfels requires a permit for most structural slab removals, and that requirement protects homeowners - the work goes on record, gets inspected, and creates documentation that matters when the home is sold or refinanced. Homes in lower-lying areas near the Guadalupe and Comal rivers, and in neighborhoods like those served from Wimberley into the broader Hill Country, often reveal failed moisture barriers when the slab comes out - something worth budgeting for before the removal begins rather than after the subgrade is exposed. We tell homeowners upfront if that is likely based on their location and the symptoms they described.
We ask a few basic questions and schedule a time to come look at the slab in person. An honest estimate cannot be given from a photo alone - the slab condition, reinforcement, and site access all affect the price. You can expect a response within one business day.
You receive a written quote breaking down labor, equipment, and haul-off before anything is agreed to. If a permit is required - which it often is for structural slab removal in New Braunfels - we pull it from the city before scheduling the crew.
The crew uses saws and jackhammers to break the slab into sections for removal. Dust control measures - wet cutting or vacuum systems - are in use throughout the job. You clear the space beforehand and keep pets and children away from the work zone.
Once the concrete is out, we haul debris and leave the subgrade level and clear. We walk through the space with you before leaving, point out anything we noticed during removal - soil conditions, moisture - and discuss what comes next.
We come out, assess the slab in person, and give you a written quote - no phone guesses, no obligation.
(830) 402-1940A large share of homes built in New Braunfels during the last decade have post-tension slabs with steel cables running under pressure. Cutting those cables incorrectly is dangerous and can damage the surrounding foundation. We assess the slab before any cutting begins and use equipment specifically designed for this type of work.
We pull all required permits from the City of New Braunfels Development Services before work begins. That means the job is on record, inspected, and documented - which protects you when you sell or refinance. A contractor who skips this step is leaving you exposed.
We do not just remove the concrete and drive away. The soil or gravel layer underneath is left level, free of buried chunks, and ready for whatever comes next - whether that is a new pour, a moisture barrier, or another trade. The contractor coming in after us should not need to fix our mess before they can start.
Not every cracked or damaged floor in New Braunfels needs to come out. If repair or resurfacing is the better answer, we will tell you - even if it means a smaller job. The National Ready Mixed Concrete Association supports standards for concrete work that we follow, and that includes recommending the right solution rather than the most expensive one.
We have worked on slabs across New Braunfels - from older homes in the historic Gruene neighborhood to newer construction in Veramendi and River Chase. The combination of clay soils, post-tension construction, and the city permitting process means local experience genuinely matters on every removal job we take.
Once removal is complete and a new slab is poured, epoxy floor coatings give the surface a durable, finished look built to last in the Texas climate.
Learn MoreWhen a slab does not need full removal, grinding and surface prep can correct damage and create a properly profiled base for new coatings or overlays.
Learn MoreThe best conditions for slab removal and new pours in New Braunfels are March through May and September through November. Reach out today to lock in your project window.