Loading...
Serving New Braunfels, TX and surrounding areas. (830) 402-1940
New Braunfels Concrete Polishing & Epoxy Flooring is a concrete flooring contractor serving Pflugerville, TX with polished concrete, epoxy floor coatings, concrete sealing, and resurfacing for the city's production-built homes and the clay soils that affect every slab in the Austin metro. We carry general liability insurance on every job and respond to all new requests within one business day.
Pflugerville homes built by production builders in the 2000s and 2010s have concrete slabs that make a strong starting point for polished interior floors. Polished concrete stays cooler than carpet during Austin-area summers, requires no adhesives or underlayment, and often costs less than replacing the floor with tile or hardwood. Polished concrete flooring is also low-maintenance for the long term - just damp mopping keeps it looking right year after year.
Pflugerville garages in neighborhoods like Blackhawk and Avalon have attached two-car slabs that are now 10 to 20 years old - past the point where builder-grade bare concrete holds up well against vehicle traffic, oil drips, and the moisture that clay soil pushes up through the slab year-round. A properly applied epoxy system seals out that moisture, resists staining, and gives the floor a durable finished surface that cleans easily.
Pflugerville's clay soil responds to every rain event by swelling, and driveways and patios that have not been sealed allow water to enter surface cracks and accelerate that movement from below. Sealing is the most cost-effective single step a Pflugerville homeowner can take to slow concrete deterioration - it extends the life of existing flatwork and reduces the frequency of crack repair that clay soil conditions make inevitable here.
Most Pflugerville subdivision homes have attached garages with bare concrete slabs that have never had a protective finish applied. Whether the goal is a chip broadcast system for a workshop, a solid color epoxy for a clean look, or a polyaspartic topcoat for faster cure times during Pflugerville's hot summers, the right coating system starts with proper surface preparation and moisture testing - steps that make the difference between a coating that lasts and one that peels within a season.
Driveways and patios in the older parts of Pflugerville near Pecan Street and the original downtown area have been through enough wet-dry cycles to show surface scaling, fading, and shallow cracks. Resurfacing applies a fresh bonded layer to the existing slab and restores function and appearance without the cost of full replacement - a practical option for structurally sound concrete that just needs a new surface.
Pflugerville summers are long and hot, and pool decks in this area take constant UV exposure, barefoot traffic, and chemical contact from April through September. Textured, UV-resistant coatings protect pool deck concrete from surface breakdown and keep the deck slip-resistant and comfortable underfoot when temperatures climb well past 100 degrees Fahrenheit during peak summer.
Pflugerville is one of the fastest-growing cities in Texas, and nearly all of that growth has come through residential subdivision development. The bulk of the housing stock was built between 2000 and 2020 by large production builders. That matters for concrete work because these homes were all built on the same type of soil - expansive clay, sometimes called black gumbo, that the Texas A&M AgriLife Extension recognizes as one of the most problematic soil types for residential construction in Texas. That soil swells with every rain and shrinks during the dry summer months, and after 15 to 20 years those repeated movements show up as cracking driveways, surface spalling on patios, and garage slabs that have absorbed enough moisture to push coatings off if they are not properly tested first.
Production-built homes in Pflugerville's subdivisions also tend to have consistent materials and construction methods across entire neighborhoods. That consistency means contractors who know what D.R. Horton, Lennar, and KB Home used during a given build window can predict what they will find on arrival - the type of concrete, the slab thickness, the garage layout, and the likely condition of a slab at a given age. Working with a contractor who knows these homes saves time at the estimate stage and reduces the chance of surprises after work begins.
Our crew works throughout Pflugerville regularly, and we understand the local conditions that affect concrete flooring work here. The city is organized around SH 130 and the streets feeding into master-planned communities like Blackhawk, Avalon, and Villages of Hidden Lake - subdivisions built out in phases during the 2000s and 2010s where homes in the same neighborhood share the same slab age and soil conditions. The older parts of town near Pecan Street and historic downtown Pflugerville have a different character - smaller lots, older homes, and concrete that has been through more wet-dry cycles than the newer subdivisions on the city's east side.
Lake Pflugerville sits near the center of the city and is one of the landmarks residents use to orient themselves. We have worked on properties throughout the surrounding neighborhoods and know the concrete conditions there well. Homes closer to the lake often have older driveways and patios that need sealing or resurfacing; homes in the newer eastern subdivisions more commonly need their first garage coating applied to slabs that have never had one.
Pflugerville sits in the northern part of the Austin metro, near Lockhart to the southeast. We serve both communities, and if you are coordinating a project across multiple properties or looking for a contractor who knows this part of Central Texas, we are familiar with the conditions on both sides of the metro edge.
Call us or submit the contact form and tell us what you are working with - garage floor, interior concrete, driveway, or something else. We respond to all Pflugerville inquiries within one business day.
We visit your Pflugerville property to inspect the slab directly - checking cracks, moisture levels, existing coatings or sealers, and overall condition. This is where we identify any repairs needed before work begins and give you an accurate project cost rather than a rough range.
Work begins with surface preparation - grinding, crack repair, and moisture testing. The coating, polish, or treatment is applied once the slab is ready. Most Pflugerville garage and interior concrete jobs are complete within one to three days of active work.
After curing - typically foot traffic within 24 hours, vehicles within 48 to 72 hours for coatings - we walk through the finished work with you. We leave care instructions and our contact information so you have a direct line if any questions come up after the job is done.
We serve Pflugerville homeowners with no subcontractors and no guesswork. Call or fill out the form and we will respond within one business day.
(830) 402-1940Pflugerville is a city of more than 73,000 people located about 15 miles northeast of downtown Austin, just north of Round Rock. The city grew rapidly through the 2000s and 2010s as the Austin metro expanded northward, and most of its residential neighborhoods are master-planned subdivisions built by large production builders. Blackhawk, Avalon, and Villages of Hidden Lake are among the largest and best-known. The original part of town, centered around Pecan Street, preserves Pflugerville's older character and is distinct from the newer subdivisions surrounding it. The City of Pflugerville manages local services and parks, including Lake Pflugerville - a 180-acre reservoir in the center of town with a swimming beach, trails, and picnic areas that serves as one of the city's main gathering spots for families.
Pflugerville is a community of working homeowners who commute into Austin or work in the tech and healthcare corridors along US 183 and SH 130. Most homes are single-family, owner-occupied properties. Pflugerville connects to Lockhart to the southeast and to Kyle and Buda further down IH-35 - parts of the broader Central Texas region we also serve. If you are in any of these communities and need concrete flooring work done, the same team handles it.
Durable, high-gloss epoxy coatings that protect and beautify any concrete floor.
Learn MoreHeavy-duty epoxy systems built for commercial and industrial environments.
Learn MoreChemical and impact-resistant flooring for demanding wet environments.
Learn MoreSmooth, reflective concrete floors that require minimal maintenance.
Learn MoreRich, permanent color that enhances the natural look of concrete.
Learn MoreProfessional surface prep that ensures lasting coating adhesion.
Learn MoreSmooth, level surfaces that correct uneven or damaged floors.
Learn MoreSlip-resistant, heat-reflective finishes for safer pool decks.
Learn MoreComplete removal of old coatings to prepare for a fresh start.
Learn MoreGet a clear picture of what your slab needs and what the job will cost. We respond to all Pflugerville requests within one business day.